Recent submissions

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

González Pociño, Alejandro; Asensio Lozano, Juan

; Álvarez Antolín, José Florentino

; García Díez, Ana (2021)

Research and development of novel refractory of MgO doped with ZrO2 nanoparticles for copper slag resistance

Gómez Rodríguez, Cristian; Antonio Zárate, Yanet; Revuelta Acosta, Josept; Verdeja González, Luis Felipe

; Fernández González, Daniel

(2021)

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras

Fernández Pérez, Begoña

; Viña Mediavilla, J. J.; Ayala Espina, Julia María

; Ania, Conchi O. (2021)

Hydrogen diffusion and trapping in A 42CrMo4 quenched and tempered steel: Influence of tempering temperature

Zafra García, Alfredo Manuel

; Peral Martínez, Luis Borja

; Belzunce Varela, Francisco Javier

(2020)

Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

Viña Olay, Jaime Aurelio

; Bonhomme González, Jorge

; Mollón Sánchez, María Victoria

; Viña Olay, María Isabel

; Argüelles Amado, Antonio

(2020)

Evaluation of hydrogen trapping and diffusion in two cold worked CrMo(V) steel grades by means of the electrochemical hydrogen permeation technique

Peral Martínez, Luis Borja

; Amghouz, Zakariae

; Colombo, C.; Fernández Pariente, Inés

(2020)

Analysis of the influence of microstructural traps on hydrogen assisted fatigue

Fernández Sousa, Rebeca

; Betegón Biempica, María Covadonga

; Martínez Pañeda, Emilio

(2020)

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Díaz, A.; Zafra García, Alfredo Manuel

; Martínez Pañeda, E.; Alegre, J. M.; Belzunce Varela, Francisco Javier

; Cuesta, I. I. (2020)

Sensitivity to hydrogen embrittlement of AISI 4140 steel: A numerical study on fracture toughness

Colombo, C.; Zafra García, Alfredo Manuel

; Belzunce Varela, Francisco Javier

; Fernández Pariente, Inés

(2020)

Retroextrapolation of crack growth curves using phenomenological models based on cumulative distribution functions of the generalized extreme value family

Blasón González, Sergio

; Fernández Canteli, Alfonso Carlos

; Rodríguez González, María Cristina

; Castillo, E. (2020)

SPT analysis of hydrogen embrittlement in CrMoV welds

Álvarez Díaz, Guillermo

; Zafra García, Alfredo Manuel

; Rodríguez González, María Cristina

; Belzunce Varela, Francisco Javier

; Cuesta, I. I. (2020)

Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: Influence of quenching temperature and plastic deformation

Zafra García, Alfredo Manuel

; Belzunce Varela, Francisco Javier

; Rodríguez González, María Cristina

(2020)

Effect of internal hydrogen on the tensile properties of different CrMo(V) steel grades: influence of vanadium addition on hydrogen trapping and diffusion

Peral Martínez, Luis Borja

; Zafra García, Alfredo Manuel

; Fernández Pariente, Inés

; Rodríguez González, María Cristina

; Belzunce Varela, Francisco Javier

(2020)

Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy

Peral Martínez, Luis Borja

; Zafra García, Alfredo Manuel

; Bagherifard, S.; Guagliano, M.; Fernández Pariente, Inés

(2020)

Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo

González Pociño, Alejandro; Álvarez Antolín, José Florentino

; Asensio Lozano, Juan

; Álvarez Pérez, Carlos Hugo

(2020)

The Effects of Shot Peening on the Surface Characteristics of 35NCD16 Alloy Steel

Benaissa, Mohamed; Benkhenafou, Fethi; Ziadi, Abdelkader; Peral Martínez, Luis Borja

; Belzunce Varela, Francisco Javier

; Douadji, Lyes (2020)

Three new hybrid quasi-3D and 2D higher-order shear deformation theories for free vibration analysis of functionally graded material monolayer and sandwich plates with stretching effect

Belkhodja, Y.; Ouinas, D.; Fekirini, H.; Viña Olay, Jaime Aurelio

; Touahmia, M. (2020)

Hydrogen embrittlement of the coarse grain heat affected zone of a quenched and tempered 42CrMo4 steel

Zafra García, Alfredo Manuel

; Belzunce Varela, Francisco Javier

; Rodríguez González, María Cristina

; Fernández Pariente, Inés

(2020)

Effect of mineral aggregates and chemical admixtures as internal curing agents on the mechanical properties and durability of high-performance concrete

Vázquez Rodríguez, Francisco Javier; Elizondo Villareal, Nora; Verástegui, Luz H.; Arato Tovar, Ana María; López Perales, Jesús Fernando; Contreras de León, José Eulalio; Gómez Rodríguez, Cristian; Fernández González, Daniel

; Verdeja González, Luis Felipe

; García Quiñonez, Linda Viviana; Rodríguez Castellanos, E. A. (2020)

A multi-faceted, environmental forensic characterization of a paradigmatic brownfield polluted by hazardous waste containing Hg, As, PAHs and dioxins

Fernández Pérez, Begoña

; Lara Gómez, Luis Manuel

; Menéndez Aguado, Juan María

; Ayala Espina, Julia María

; García González, Nerea

; Salgado Fernández, Lorena

; Colina Vuelta, Arturo

; Rodríguez Gallego, José Luis

(2020)

Repositorio Institucional de la Universidad de Oviedo

Ciencias de los Materiales e Ingeniería Metalúrgica: Recent submissions

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

Research and development of novel refractory of MgO doped with ZrO2 nanoparticles for copper slag resistance

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras

Hydrogen diffusion and trapping in A 42CrMo4 quenched and tempered steel: Influence of tempering temperature

Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

Evaluation of hydrogen trapping and diffusion in two cold worked CrMo(V) steel grades by means of the electrochemical hydrogen permeation technique

Analysis of the influence of microstructural traps on hydrogen assisted fatigue

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Sensitivity to hydrogen embrittlement of AISI 4140 steel: A numerical study on fracture toughness

Retroextrapolation of crack growth curves using phenomenological models based on cumulative distribution functions of the generalized extreme value family

SPT analysis of hydrogen embrittlement in CrMoV welds

Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: Influence of quenching temperature and plastic deformation

Effect of internal hydrogen on the tensile properties of different CrMo(V) steel grades: influence of vanadium addition on hydrogen trapping and diffusion

Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy

Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo

The Effects of Shot Peening on the Surface Characteristics of 35NCD16 Alloy Steel

Three new hybrid quasi-3D and 2D higher-order shear deformation theories for free vibration analysis of functionally graded material monolayer and sandwich plates with stretching effect

Hydrogen embrittlement of the coarse grain heat affected zone of a quenched and tempered 42CrMo4 steel

Effect of mineral aggregates and chemical admixtures as internal curing agents on the mechanical properties and durability of high-performance concrete

A multi-faceted, environmental forensic characterization of a paradigmatic brownfield polluted by hazardous waste containing Hg, As, PAHs and dioxins

Ciencias de los Materiales e Ingeniería Metalúrgica: Recent submissions

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments ﻿

Research and development of novel refractory of MgO doped with ZrO2 nanoparticles for copper slag resistance ﻿

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras ﻿

Hydrogen diffusion and trapping in A 42CrMo4 quenched and tempered steel: Influence of tempering temperature ﻿

Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain) ﻿

Evaluation of hydrogen trapping and diffusion in two cold worked CrMo(V) steel grades by means of the electrochemical hydrogen permeation technique ﻿

Analysis of the influence of microstructural traps on hydrogen assisted fatigue ﻿

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation ﻿

Sensitivity to hydrogen embrittlement of AISI 4140 steel: A numerical study on fracture toughness ﻿

Retroextrapolation of crack growth curves using phenomenological models based on cumulative distribution functions of the generalized extreme value family ﻿

SPT analysis of hydrogen embrittlement in CrMoV welds ﻿

Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: Influence of quenching temperature and plastic deformation ﻿

Effect of internal hydrogen on the tensile properties of different CrMo(V) steel grades: influence of vanadium addition on hydrogen trapping and diffusion ﻿

Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy ﻿

Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo ﻿

The Effects of Shot Peening on the Surface Characteristics of 35NCD16 Alloy Steel ﻿

Three new hybrid quasi-3D and 2D higher-order shear deformation theories for free vibration analysis of functionally graded material monolayer and sandwich plates with stretching effect ﻿

Hydrogen embrittlement of the coarse grain heat affected zone of a quenched and tempered 42CrMo4 steel ﻿

Effect of mineral aggregates and chemical admixtures as internal curing agents on the mechanical properties and durability of high-performance concrete ﻿

A multi-faceted, environmental forensic characterization of a paradigmatic brownfield polluted by hazardous waste containing Hg, As, PAHs and dioxins ﻿

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

Research and development of novel refractory of MgO doped with ZrO2 nanoparticles for copper slag resistance

Eficacia del permanganato potásico en la degradación de cianuro y tiocianato en aguas residuales mineras

Hydrogen diffusion and trapping in A 42CrMo4 quenched and tempered steel: Influence of tempering temperature

Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

Evaluation of hydrogen trapping and diffusion in two cold worked CrMo(V) steel grades by means of the electrochemical hydrogen permeation technique

Analysis of the influence of microstructural traps on hydrogen assisted fatigue

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Sensitivity to hydrogen embrittlement of AISI 4140 steel: A numerical study on fracture toughness

Retroextrapolation of crack growth curves using phenomenological models based on cumulative distribution functions of the generalized extreme value family

SPT analysis of hydrogen embrittlement in CrMoV welds

Hydrogen diffusion and trapping in 42CrMo4 quenched and tempered steel: Influence of quenching temperature and plastic deformation

Effect of internal hydrogen on the tensile properties of different CrMo(V) steel grades: influence of vanadium addition on hydrogen trapping and diffusion

Effect of warm shot peening treatments on surface properties and corrosion behavior of AZ31 magnesium alloy

Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo

The Effects of Shot Peening on the Surface Characteristics of 35NCD16 Alloy Steel

Three new hybrid quasi-3D and 2D higher-order shear deformation theories for free vibration analysis of functionally graded material monolayer and sandwich plates with stretching effect

Hydrogen embrittlement of the coarse grain heat affected zone of a quenched and tempered 42CrMo4 steel

Effect of mineral aggregates and chemical admixtures as internal curing agents on the mechanical properties and durability of high-performance concrete

A multi-faceted, environmental forensic characterization of a paradigmatic brownfield polluted by hazardous waste containing Hg, As, PAHs and dioxins