Envíos recientes

XPS study on calcining mixtures of brucite with titania

Sánchez Zambrano, K. S.; Hernández Reséndiz, M.; Gómez Rodríguez, C.; García Quiñonez, L. V.; Aguilar Martínez, J. A.; Rodríguez Castellanos, E. A.; Verdeja González, Luis Felipe

; Fernández González, D.; Castillo Rodríguez, G. A. (2022)

Mgo–zro2 ceramic composites for silicomanganese production

Gómez Rodríguez, C.; García Quiñonez, L. V.; Aguilar Martínez, J. A.; Castillo Rodríguez, G. A.; Rodríguez Castellanos, E. A.; López Perales, J. F.; Mendivil Palma, M. I.; Verdeja González, Luis Felipe

; Fernández González, Daniel

(2022)

Influence of hydrogen on the fatigue crack growth rate of 42CrMo4 steel welds: a comparison between pre-charge and in-situ testing

Zafra García, Alfredo Manuel

; Álvarez Díaz, Guillermo

; Benoi, t G.; Hénaff, G.; Rodríguez González, María Cristina

; Belzunce Varela, Francisco Javier

(2021)

Cohesive zone modelling of hydrogen assisted fatigue crack growth: the role of trapping

Fernández Sousa, Rebeca

; Betegón Biempica, María Covadonga

; Martínez Pañeda, Emilio

(2022)

Optimisation of thermal processes with plasma nitriding on vanadis 4 high speed steel

Álvarez Antolín, José Florentino

; González Pociño, Alejandro; Cofiño Villar, Alberto; Álvarez Pérez, Carlos Hugo

(2022)

Improvement in the resistance to wear of work-rolls used in finishing stands of the hot strip mills

Cofiño Villar, Alberto; Álvarez Antolín, José Florentino

; Álvarez Pérez, Carlos Hugo

(2021)

The influence of aqueous se(iv) on the stability of different caco3 polymorphs precipitated under ambient conditions

Fernández González, María de los Ángeles

; Lozano Letellier, A.; Fernández Pérez, Begoña

(2021)

The positive role of nanometric molybdenum–vanadium carbides in mitigating hydrogen embrittlement in structural steels

Peral Martínez, Luis Borja

; Fernández Pariente, Inés

; Colombo, C.; Rodríguez González, María Cristina

; Belzunce Varela, Francisco Javier

(2021)

How to avoid the detachment of threads of varnish during production, through cutting and drawing, in the manufacture of lids with a ‘twist-off’ mechanism used for the closure of glass containers

Álvarez Antolín, José Florentino

; Francos Garrote, Laura; González Pociño, Alejandro; Cofiño Villar, A. (2021)

Whey-derived porous carbon scaffolds for bone tissue engineering

Llamas Unzueta, R.; Suárez Menéndez, Marta

; Fernández Valdés, Adolfo

; Díaz, R.; Montes Morán, Miguel Ángel; Menéndez Díaz, J. Ángel (2021)

Influence of tempering time on the fracture toughness of hydrogen pre-charged 42CrMo4 steel

Zafra García, Alfredo Manuel

; Álvarez Díaz, Guillermo

; Belzunce Varela, Francisco Javier

; Rodríguez González, María Cristina

(2022)

Health risk assessment of potentially toxic elements in the dry deposition fraction of settleable particulate matter in urban and suburban locations in the city of Gijón, Spain

Lara, R.; Suárez Peña, Beatriz

; Megido Fernández, Laura

; Negral Álvarez, Luis

; Rodríguez Iglesias, Jesús Avelino

; Fernández Nava, Yolanda

; Castrillón Peláez, Leonor

(2021)

Consolidation and mechanical properties of ZrCu39.85Y2.37Al1.8 bulk metallic glass obtained from gas-atomized powders by spark plasma sintering

Suárez Menéndez, Marta

; Fernández González, Daniel

; Díaz Rodríguez, Luis Antonio

; Diologent, F.; Verdeja González, Luis Felipe

; Fernández Valdés, Adolfo

(2021)

Recovery of copper and magnetite from copper slag using concentrated solar power (CSP)

Fernández González, Daniel

; Prazuch, J.; Ruiz Bustinza, I.; González Gasca, C.; Gómez Rodríguez, C.; Verdeja González, Luis Felipe

(2021)

Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%Cr after heat treatments

González Pociño, Alejandro; Asensio Lozano, Juan

; Álvarez Antolín, José Florentino

; García Díez, Ana (2021)

Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al‐zr alloys treated at high temperatures

Álvarez Antolín, José Florentino

; Amghouz, Zakariae

; Cofiño Villar, Alberto; González Pociño, Alejandro; García Melero, Manuel Emilio

(2021)

Cast and machined porous carbon structures made from whey

Llamas Unzueta, R.; Ramírez Montoya, L. A.; Viña Olay, Jaime Aurelio

; Argüelles Amado, Antonio

; Montes Morán, Miguel Ángel; Menéndez, J. A. (2021)

3-D structured porous carbons with virtually any shape from whey powders

Llamas Unzueta, R.; Menéndez, J. A.; Ramírez Montoya, L. A.; Viña Olay, Jaime Aurelio

; Argüelles Amado, Antonio

; Montes Morán, Miguel Ángel (2021)

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

González Pociño, Alejandro; Asensio Lozano, Juan

; Álvarez Antolín, José Florentino

; García Díez, Ana (2021)

The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% Cr

González Pociño, Alejandro; Álvarez Antolín, José Florentino

; Asensio Lozano, Juan

(2021)

Repositorio Institucional de la Universidad de Oviedo

Ciencias de los Materiales e Ingeniería Metalúrgica: Envíos recientes

XPS study on calcining mixtures of brucite with titania

Mgo–zro2 ceramic composites for silicomanganese production

Influence of hydrogen on the fatigue crack growth rate of 42CrMo4 steel welds: a comparison between pre-charge and in-situ testing

Cohesive zone modelling of hydrogen assisted fatigue crack growth: the role of trapping

Optimisation of thermal processes with plasma nitriding on vanadis 4 high speed steel

Improvement in the resistance to wear of work-rolls used in finishing stands of the hot strip mills

The influence of aqueous se(iv) on the stability of different caco3 polymorphs precipitated under ambient conditions

The positive role of nanometric molybdenum–vanadium carbides in mitigating hydrogen embrittlement in structural steels

How to avoid the detachment of threads of varnish during production, through cutting and drawing, in the manufacture of lids with a ‘twist-off’ mechanism used for the closure of glass containers

Whey-derived porous carbon scaffolds for bone tissue engineering

Influence of tempering time on the fracture toughness of hydrogen pre-charged 42CrMo4 steel

Health risk assessment of potentially toxic elements in the dry deposition fraction of settleable particulate matter in urban and suburban locations in the city of Gijón, Spain

Consolidation and mechanical properties of ZrCu39.85Y2.37Al1.8 bulk metallic glass obtained from gas-atomized powders by spark plasma sintering

Recovery of copper and magnetite from copper slag using concentrated solar power (CSP)

Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%Cr after heat treatments

Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al‐zr alloys treated at high temperatures

Cast and machined porous carbon structures made from whey

3-D structured porous carbons with virtually any shape from whey powders

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% Cr

Ciencias de los Materiales e Ingeniería Metalúrgica: Envíos recientes

XPS study on calcining mixtures of brucite with titania ﻿

Mgo–zro2 ceramic composites for silicomanganese production ﻿

Influence of hydrogen on the fatigue crack growth rate of 42CrMo4 steel welds: a comparison between pre-charge and in-situ testing ﻿

Cohesive zone modelling of hydrogen assisted fatigue crack growth: the role of trapping ﻿

Optimisation of thermal processes with plasma nitriding on vanadis 4 high speed steel ﻿

Improvement in the resistance to wear of work-rolls used in finishing stands of the hot strip mills ﻿

The influence of aqueous se(iv) on the stability of different caco3 polymorphs precipitated under ambient conditions ﻿

The positive role of nanometric molybdenum–vanadium carbides in mitigating hydrogen embrittlement in structural steels ﻿

How to avoid the detachment of threads of varnish during production, through cutting and drawing, in the manufacture of lids with a ‘twist-off’ mechanism used for the closure of glass containers ﻿

Whey-derived porous carbon scaffolds for bone tissue engineering ﻿

Influence of tempering time on the fracture toughness of hydrogen pre-charged 42CrMo4 steel ﻿

Health risk assessment of potentially toxic elements in the dry deposition fraction of settleable particulate matter in urban and suburban locations in the city of Gijón, Spain ﻿

Consolidation and mechanical properties of ZrCu39.85Y2.37Al1.8 bulk metallic glass obtained from gas-atomized powders by spark plasma sintering ﻿

Recovery of copper and magnetite from copper slag using concentrated solar power (CSP) ﻿

Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%Cr after heat treatments ﻿

Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al‐zr alloys treated at high temperatures ﻿

Cast and machined porous carbon structures made from whey ﻿

3-D structured porous carbons with virtually any shape from whey powders ﻿

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments ﻿

The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% Cr ﻿

XPS study on calcining mixtures of brucite with titania

Mgo–zro2 ceramic composites for silicomanganese production

Influence of hydrogen on the fatigue crack growth rate of 42CrMo4 steel welds: a comparison between pre-charge and in-situ testing

Cohesive zone modelling of hydrogen assisted fatigue crack growth: the role of trapping

Optimisation of thermal processes with plasma nitriding on vanadis 4 high speed steel

Improvement in the resistance to wear of work-rolls used in finishing stands of the hot strip mills

The influence of aqueous se(iv) on the stability of different caco3 polymorphs precipitated under ambient conditions

The positive role of nanometric molybdenum–vanadium carbides in mitigating hydrogen embrittlement in structural steels

How to avoid the detachment of threads of varnish during production, through cutting and drawing, in the manufacture of lids with a ‘twist-off’ mechanism used for the closure of glass containers

Whey-derived porous carbon scaffolds for bone tissue engineering

Influence of tempering time on the fracture toughness of hydrogen pre-charged 42CrMo4 steel

Health risk assessment of potentially toxic elements in the dry deposition fraction of settleable particulate matter in urban and suburban locations in the city of Gijón, Spain

Consolidation and mechanical properties of ZrCu39.85Y2.37Al1.8 bulk metallic glass obtained from gas-atomized powders by spark plasma sintering

Recovery of copper and magnetite from copper slag using concentrated solar power (CSP)

Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%Cr after heat treatments

Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al‐zr alloys treated at high temperatures

Cast and machined porous carbon structures made from whey

3-D structured porous carbons with virtually any shape from whey powders

Improvement of impact toughness and abrasion resistance of a 3C‐25Cr‐0.5Mo alloy using a design of experiment statistical technique: microstructural correlations after heat treatments

The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% Cr