Envíos recientes

J-PLUS: Discovery and characterisation of ultracool dwarfs using Virtual Observatory tools.II. Second data release and machine learning methodology

Mas Buitrago, P.; Solano, E.; González Marcos, A.; Bello García, Antonio

(2022)

Study of the fatigue delamination behaviour of adhesive joints in carbon fibre reinforced epoxy composites, influence of the period of exposure to saline environment

Argüelles Amado, Antonio

; Viña Olay, María Isabel

; Vigón Blanco, Paula

; Lozano García, Miguel

; Viña Olay, Jaime Aurelio

(2022)

Phase plane analysis applied to non-explicit multibody vehicle models

Álvarez Mántaras, Daniel

; Luque Rodríguez, Pablo

; Alonso Martínez, Mar

(2022)

Culturing Arthrospira maxima in mining wastewater: Pilot-scale culturing and biomass valorisation into C-phycocyanin and crude lipid extract

Blanco Vieites, M.; Casado, V.; Hernández Battez, Antolín Esteban

; Rodríguez Ordóñez, Eduardo

(2023)

Assessment of the thermal properties for the geothermal use of a permeable pavement structure for pedestrian and cycle paths

Rey Mahía, Carlos

; Álvarez Rabanal, Felipe Pedro

; Sañudo Fontaneda, Luis Angel (Lietuvos mokslų akademija, 2023-01-26)

The role of geothermal heat pump systems in the water–energy nexus

Rey Mahía, Carlos

; Álvarez Rabanal, Felipe Pedro

; Coupe, Stephen J.; Sañudo Fontaneda, Luis Ángel

(Springer, 2023-03-22)

Orthopedic surgeons’ accuracy when orienting an acetabular cup. A comparison with untrained individuals

Moreta, J.; Gayoso, Ó.; Donaire Hoyas, D.; Roces García, Jorge

; Gómez Vallejo, J.; Moya Gómez, E.; Raya Roldán, D.; Albert Ullibarri, A.; Marqués López, F.; Albareda, J. (2022)

Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates

Iglesias, A.; Muñiz Calvente, Miguel

; Fernández Canteli, Alfonso Carlos

; Llavori, I.; Martinez Agirre, M.; Esnaola, J. A. (2022)

Novel post-processing procedure to enhance casting molds manufactured by binder jetting am

Zapico García, Pablo

; Robles Valero, P. E.; Barreiro, J. (2022)

Griffith-based analysis of crack initiation location in a Brazilian test

Navidtehrani, Y.; Betegón Biempica, María Covadonga

; Zimmerman, R. W.; Martínez Pañeda, Emilio

(2022)

Experimental study of the characteristics of explosions generated by methane mixtures, as a function of the type of atmosphere and environmental conditions

Prendes Gero, María Belén

; Álvarez Fernández, Martina Inmaculada

; Conde Fernández, Lucía

; Luengo García, Juan Carlos

; González Nicieza, Celestino

(2022)

Difference between impacts of COVID-19 on women and men’s psychological, social, vulnerable work situations, and economic well-being

Iglesias Martínez, Enrique

; Roces García, Jorge

; Jiménez Arberas, Estíbaliz

; Llosa Fernández, José Antonio

(2022)

Cooling performance of fresh and aged automatic transmission fluids for hybrid electric vehicles

Rivera Rellán, Noelia

; Viesca Rodríguez, José Luis

; García Martínez, Alberto

; Prado, José I.; Lugo, Luis; Hernández Battez, Antolín Esteban

(2022)

Axial-moment interaction for 2d extended end plate bolted steel connections. Experimental investigation and assessment of the initial imperfections

Gil, B.; Gracia Rodríguez, Javier

; Bayo, E. (2022)

Boosting computer-aided design pedagogy using interactive self-assessment graphical tools

Pando Cerra, Pablo

; Fernández Álvarez, Humberto

; Busto Parra, Bernardo

; Castaño Busón, Sofía

(2022)

A comparative review of time- and frequency-domain methods for fatigue damage assessment

Muñiz Calvente, Miguel

; Álvarez Vázquez, Adrián

; Fernández Fernández, Pelayo

; Aenlle López, Manuel

; García Fernández, Natalia

; Lamela Rey, María Jesús

(2022)

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker–Prager failure surface

Navidtehrani, Y.; Betegón Biempica, María Covadonga

; Martínez Pañeda, Emilio

(2022)

¿Es el gas natural licuado una alternativa a la tracción ferroviaria no electrificada?

Luque Rodríguez, Pablo

; Álvarez Mántaras, Daniel

; Sánchez Ramos, Luciano

(2022)

Study of the influence of the type of aging on the behavior of delamination of adhesive joints in carbon-fiber-reinforced epoxy composites

Vigón Blanco, Paula

; Argüelles Amado, Antonio

; Mollón Sánchez, María Victoria

; Lozano García, Miguel

; Bonhomme González, Jorge

; Viña Olay, Jaime Aurelio

(2022)

Response of laminated glass elements subject to dynamic loadings using a monolithic model and a stress effective young’s modulus

Aenlle López, Manuel

; Fernández Fernández, Pelayo

; Álvarez Vázquez, Adrián

; García Fernández, Natalia

; Muñiz Calvente, Miguel

(2022)

Repositorio Institucional de la Universidad de Oviedo

Construcción e Ingeniería de Fabricación: Envíos recientes

J-PLUS: Discovery and characterisation of ultracool dwarfs using Virtual Observatory tools.II. Second data release and machine learning methodology

Study of the fatigue delamination behaviour of adhesive joints in carbon fibre reinforced epoxy composites, influence of the period of exposure to saline environment

Phase plane analysis applied to non-explicit multibody vehicle models

Culturing Arthrospira maxima in mining wastewater: Pilot-scale culturing and biomass valorisation into C-phycocyanin and crude lipid extract

Assessment of the thermal properties for the geothermal use of a permeable pavement structure for pedestrian and cycle paths

The role of geothermal heat pump systems in the water–energy nexus

Orthopedic surgeons’ accuracy when orienting an acetabular cup. A comparison with untrained individuals

Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates

Novel post-processing procedure to enhance casting molds manufactured by binder jetting am

Griffith-based analysis of crack initiation location in a Brazilian test

Experimental study of the characteristics of explosions generated by methane mixtures, as a function of the type of atmosphere and environmental conditions

Difference between impacts of COVID-19 on women and men’s psychological, social, vulnerable work situations, and economic well-being

Cooling performance of fresh and aged automatic transmission fluids for hybrid electric vehicles

Axial-moment interaction for 2d extended end plate bolted steel connections. Experimental investigation and assessment of the initial imperfections

Boosting computer-aided design pedagogy using interactive self-assessment graphical tools

A comparative review of time- and frequency-domain methods for fatigue damage assessment

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker–Prager failure surface

¿Es el gas natural licuado una alternativa a la tracción ferroviaria no electrificada?

Study of the influence of the type of aging on the behavior of delamination of adhesive joints in carbon-fiber-reinforced epoxy composites

Response of laminated glass elements subject to dynamic loadings using a monolithic model and a stress effective young’s modulus

Construcción e Ingeniería de Fabricación: Envíos recientes

J-PLUS: Discovery and characterisation of ultracool dwarfs using Virtual Observatory tools.II. Second data release and machine learning methodology ﻿

Study of the fatigue delamination behaviour of adhesive joints in carbon fibre reinforced epoxy composites, influence of the period of exposure to saline environment ﻿

Phase plane analysis applied to non-explicit multibody vehicle models ﻿

Culturing Arthrospira maxima in mining wastewater: Pilot-scale culturing and biomass valorisation into C-phycocyanin and crude lipid extract ﻿

Assessment of the thermal properties for the geothermal use of a permeable pavement structure for pedestrian and cycle paths ﻿

The role of geothermal heat pump systems in the water–energy nexus ﻿

Orthopedic surgeons’ accuracy when orienting an acetabular cup. A comparison with untrained individuals ﻿

Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates ﻿

Novel post-processing procedure to enhance casting molds manufactured by binder jetting am ﻿

Griffith-based analysis of crack initiation location in a Brazilian test ﻿

Experimental study of the characteristics of explosions generated by methane mixtures, as a function of the type of atmosphere and environmental conditions ﻿

Difference between impacts of COVID-19 on women and men’s psychological, social, vulnerable work situations, and economic well-being ﻿

Cooling performance of fresh and aged automatic transmission fluids for hybrid electric vehicles ﻿

Axial-moment interaction for 2d extended end plate bolted steel connections. Experimental investigation and assessment of the initial imperfections ﻿

Boosting computer-aided design pedagogy using interactive self-assessment graphical tools ﻿

A comparative review of time- and frequency-domain methods for fatigue damage assessment ﻿

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker–Prager failure surface ﻿

¿Es el gas natural licuado una alternativa a la tracción ferroviaria no electrificada? ﻿

Study of the influence of the type of aging on the behavior of delamination of adhesive joints in carbon-fiber-reinforced epoxy composites ﻿

Response of laminated glass elements subject to dynamic loadings using a monolithic model and a stress effective young’s modulus ﻿

J-PLUS: Discovery and characterisation of ultracool dwarfs using Virtual Observatory tools.II. Second data release and machine learning methodology

Study of the fatigue delamination behaviour of adhesive joints in carbon fibre reinforced epoxy composites, influence of the period of exposure to saline environment

Phase plane analysis applied to non-explicit multibody vehicle models

Culturing Arthrospira maxima in mining wastewater: Pilot-scale culturing and biomass valorisation into C-phycocyanin and crude lipid extract

Assessment of the thermal properties for the geothermal use of a permeable pavement structure for pedestrian and cycle paths

The role of geothermal heat pump systems in the water–energy nexus

Orthopedic surgeons’ accuracy when orienting an acetabular cup. A comparison with untrained individuals

Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates

Novel post-processing procedure to enhance casting molds manufactured by binder jetting am

Griffith-based analysis of crack initiation location in a Brazilian test

Experimental study of the characteristics of explosions generated by methane mixtures, as a function of the type of atmosphere and environmental conditions

Difference between impacts of COVID-19 on women and men’s psychological, social, vulnerable work situations, and economic well-being

Cooling performance of fresh and aged automatic transmission fluids for hybrid electric vehicles

Axial-moment interaction for 2d extended end plate bolted steel connections. Experimental investigation and assessment of the initial imperfections

Boosting computer-aided design pedagogy using interactive self-assessment graphical tools

A comparative review of time- and frequency-domain methods for fatigue damage assessment

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker–Prager failure surface

¿Es el gas natural licuado una alternativa a la tracción ferroviaria no electrificada?

Study of the influence of the type of aging on the behavior of delamination of adhesive joints in carbon-fiber-reinforced epoxy composites

Response of laminated glass elements subject to dynamic loadings using a monolithic model and a stress effective young’s modulus