Surface texture analysis after ball end milling

dc.contributor.advisor	Swirad, Slawomir
dc.contributor.author	Carramiñana Elbaile, Miguel
dc.contributor.other	Politécnica de Ingeniería de Gijón, Escuela	spa
dc.date.accessioned	2016-11-09T10:36:25Z
dc.date.available	2016-11-09T10:36:25Z
dc.date.issued	2016
dc.identifier.uri	http://hdl.handle.net/10651/38980
dc.description.abstract	In this research, the effect of three cutting parameters on surface roughness will be investigated during ball end milling on a steel X37CrMoV51.The three cutting parameter will be the following: depth of cut, width of cut and cutting speed	spa
dc.format.extent	82 p.	spa
dc.language.iso	eng	spa
dc.relation.ispartofseries	Grado en Ingeniería de Tecnologías Industriales
dc.rights	CC Reconocimiento - No comercial - Sin obras derivadas 4.0 Internacional
dc.rights.uri	http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject	Milling	spa
dc.subject	Surface texture	spa
dc.title	Surface texture analysis after ball end milling	spa
dc.type	bachelor thesis	spa
dc.rights.accessRights	open access

This item is protected with a Creative Commons License